renamed opencv...

cc_motion_signal.py

@@ -4,8 +4,12 @@ from scipy import signal
 import matplotlib.pyplot as plt
 import sys
 
+TARGET_FPS = 30  # common reference rate
+
 def get_video_signal(path):
     cap = cv2.VideoCapture(path)
+    fps = cap.get(cv2.CAP_PROP_FPS)
+
     motion_signal = []
     prev_gray = None
 
@@ -14,13 +18,10 @@ def get_video_signal(path):
         if not ret:
             break
 
-        # 1. Shrink the frame (makes it faster and removes noise)
         small_frame = cv2.resize(frame, (160, 90))
         gray = cv2.cvtColor(small_frame, cv2.COLOR_BGR2GRAY)
 
         if prev_gray is not None:
-            # 2. Calculate the difference between this frame and the last
-            # This detects the "movement" or "cuts"
             diff = cv2.absdiff(gray, prev_gray)
             motion_signal.append(np.sum(diff))
         else:
@@ -29,28 +30,39 @@ def get_video_signal(path):
         prev_gray = gray
 
     cap.release()
-    return np.array(motion_signal)
+
+    return np.array(motion_signal), fps
+
+
+def resample_signal(sig, original_fps, target_fps):
+    duration = len(sig) / original_fps
+    target_length = int(duration * target_fps)
+
+    return signal.resample(sig, target_length)
+
 
 def find_offset(video_a, video_b):
-    # print("Extracting signals (this may take a moment)...")
-    sig_a = get_video_signal(video_a)
-    # print("sig_a finished")
-    sig_b = get_video_signal(video_b)
-    # print("sig_b finished")
 
-    # Normalize signals (subtract mean, divide by std dev) to improve correlation
+    sig_a, fps_a = get_video_signal(video_a)
+    sig_b, fps_b = get_video_signal(video_b)
+
+    # Resample both signals to common FPS
+    sig_a = resample_signal(sig_a, fps_a, TARGET_FPS)
+    sig_b = resample_signal(sig_b, fps_b, TARGET_FPS)
+
+    # Normalize
     sig_a = (sig_a - np.mean(sig_a)) / (np.std(sig_a) + 1e-5)
     sig_b = (sig_b - np.mean(sig_b)) / (np.std(sig_b) + 1e-5)
 
-    # Perform Cross-Correlation
     correlation = signal.correlate(sig_a, sig_b, mode='full')
     lags = signal.correlation_lags(len(sig_a), len(sig_b), mode='full')
-    # plt.plot(lags)
 
-    # The peak of the correlation is our offset in frames
     best_lag = lags[np.argmax(correlation)]
 
-    return best_lag
+    # Convert lag to seconds
+    offset_seconds = best_lag / TARGET_FPS
+
+    return best_lag, offset_seconds
 
 def multiple():
     # Usage
@@ -64,8 +76,11 @@ def multiple():
         sys.exit()
 
 def single():
-    video_a = f"/home/honney/mount/Media/torent/[Anime Time] One Piece (0001-1071+Movies+Specials) [BD+CR] [Dual Audio] [1080p][HEVC 10bit x265][AAC][Multi Sub]/Season 01 - East Blue/[Anime Time] One Piece - 0001 - I'm Luffy! The Man Who's Gonna Be King of the Pirates!.mkv"
+    video_a = f"/home/honney/mount/Media/tmp/serien/ger_low_quality/Black Bullet/Black Bullet Season 01 E02 Die Maske des Wahnsinns.mp4"
-    video_b = f"/home/honney/mount/Media/tmp/serien/complicated/One Piece (1999-2025) [imdbid-tt0388629]/Season 01/One Piece S01E001.mkv"
+    video_b = f"/home/honney/mount/Media/tmp/serien/high_quality/Black Bullet (Season 1)/Season 01/Black Bullet - S01E02.mkv"
 
-    offset_frames = find_offset(video_a, video_b)
+    frames, seconds = find_offset(video_a, video_b)
-    print(f"Video B is offset by {offset_frames} frames relative to Video A.")
+    print(f"Video B is offset by {frames} frames or {seconds} seconds relative to Video A.")
+
+if __name__ == '__main__':
+    single()

cut_to_length.py

@@ -6,12 +6,61 @@ import cv2
 import numpy as np
 from scipy import signal
 import sys
+import os
+import glob
+import tempfile
+import shutil
+
+DEBUG = True
 
 def run(cmd):
-    """Run a subprocess command and raise on error."""
+    """
-    subprocess.run(cmd, check=True)
+    Run a subprocess command.
+
+    Args:
+        cmd: Command and arguments as a list.
+
+    Raises:
+        subprocess.CalledProcessError: If the command exits with a non-zero status.
+    """
+    try:
+        result = subprocess.run(
+            cmd,
+            check=True,
+            stdout=subprocess.PIPE,
+            stderr=subprocess.STDOUT,
+            text=True
+        )
+        return result
+    except subprocess.CalledProcessError as e:
+        print(e.stdout)
+        raise
 
 def get_video_signal(path):
+    """
+    Compute a simple motion signal from a video.
+
+    The function reads a video frame-by-frame and measures the amount of
+    pixel change between consecutive frames. Each frame is resized and
+    converted to grayscale before calculating the absolute difference
+    from the previous frame. The summed pixel differences form a 1-D
+    motion signal representing how much visual change occurs over time.
+
+    Args:
+        path: Path to the video file to analyze.
+
+    Returns:
+        A NumPy array where each element represents the magnitude of
+        frame-to-frame change for a given frame. Higher values indicate
+        stronger motion or scene changes.
+
+    Raises:
+        RuntimeError: If the video cannot be opened or read.
+
+    Notes:
+        Frames are resized to 160×90 before processing to reduce noise
+        and computational cost.
+    """
     cap = cv2.VideoCapture(path)
     motion_signal = []
     prev_gray = None
@@ -38,7 +87,37 @@ def get_video_signal(path):
     cap.release()
     return np.array(motion_signal)
 
-def find_offset(video_a, video_b):
+def find_offset(video_a: Path, video_b: Path) -> int:
+    """
+    Estimate the temporal offset between two videos.
+
+    The function extracts a motion signal from each video using
+    `get_video_signal` and then computes the cross-correlation between
+    the two signals. The lag corresponding to the maximum correlation
+    indicates the frame offset where the videos align best.
+
+    Args:
+        video_a: Path to the first video file.
+        video_b: Path to the second video file.
+
+    Returns:
+        The offset in frames between the two videos. A positive value
+        means `video_b` starts later than `video_a`, while a negative
+        value means `video_b` starts earlier.
+
+    Raises:
+        RuntimeError: If either input path does not point to a valid file.
+
+    Notes:
+        Before computing the correlation, both signals are normalized
+        (mean subtracted and divided by standard deviation) to make the
+        comparison robust to differences in overall motion intensity.
+    """
+    if not os.path.isfile(video_a):
+        raise RuntimeError("video_a is not a file")
+    if not os.path.isfile(video_b):
+        raise RuntimeError("video_b is not a file")
+
     # print("Extracting signals (this may take a moment)...")
     sig_a = get_video_signal(video_a)
     # print("sig_a finished")
@@ -59,7 +138,7 @@ def find_offset(video_a, video_b):
     
     return best_lag
 
-def probe_video(path):
+def probe_video(path: Path):
     """Get video FPS, duration, codec, and stream start time."""
     import json
     cmd = [
@@ -83,8 +162,23 @@ def probe_video(path):
 
     raise RuntimeError("No video stream found")
 
-def trim_audio(German_Videout_mkv, start_time, end_time, out_audio):
+def trim_audio(German_Videout_mkv: Path, start_time: float, end_time: float, out_audio: Path):
-    """Trim only the first (and only) audio track from German_Videout_mkv."""
+    """
+    Extract a segment of the first audio track from a video file.
+
+    Uses FFmpeg to copy the selected audio range without re-encoding,
+    which makes the operation fast and preserves the original audio quality.
+
+    Args:
+        German_Videout_mkv: Path to the source video file.
+        start_time: Start time of the audio segment (seconds or FFmpeg time format).
+        end_time: End time of the audio segment.
+        out_audio: Path to the output audio file.
+
+    Notes:
+        The function selects the first audio stream (`0:a:0`) and copies it
+        directly (`-c:a copy`), meaning the codec and quality remain unchanged.
+    """
     run([
         "ffmpeg",
         "-y",
@@ -101,7 +195,8 @@ def mux_audio_into_output(Quality_Video, audio_file, output_dir):
     output_dir = Path(output_dir)
     output_dir.mkdir(exist_ok=True)
 
-    final_output = output_dir / f"{Path(Quality_Video).stem}_ger.mkv"
+    # final_output = output_dir / f"{Path(Quality_Video).stem}_ger.mkv"
+    final_output = output_dir / f"{Path(Quality_Video).stem}.mkv"
 
     run([
         "mkvmerge",
@@ -114,83 +209,175 @@ def mux_audio_into_output(Quality_Video, audio_file, output_dir):
 
     return final_output
 
-def only_one(German_Video, Quality_Video):
+def stick_together_audio(left_audio: Path, right_audio: Path, output_audio: Path) -> None:
-    n1 = find_offset(German_Video, Quality_Video)                  # first frame to keep
+    """
-    print(n1)
+    Concatenate two audio files end-to-end into a single file.
-    sys.exit()
-    output_dir = "./output_dir"
 
+    Args:
+        left_audio: Path to the first audio file.
+        right_audio: Path to the second audio file.
+        output_audio: Path to the resulting audio file. Can overwrite
+                      one of the input files safely.
+
+    Notes:
+        Works for audio files with the same codec and format. Internally,
+        writes to a temporary file first, then moves it to `output_audio`
+        to avoid overwriting input files prematurely.
+    """
+    left_audio = Path(left_audio)
+    right_audio = Path(right_audio)
+    output_audio = Path(output_audio)
+
+    # Temporary output file in the same directory to allow atomic move
+    tmp_output = output_audio.with_name(f"{output_audio.stem}_tmp{output_audio.suffix}")
+
+    # Create a temporary file list for FFmpeg
+    with tempfile.NamedTemporaryFile("w", delete=False, suffix=".txt") as f:
+        f.write(f"file '{left_audio.resolve()}'\n")
+        f.write(f"file '{right_audio.resolve()}'\n")
+        list_file = Path(f.name)
+
+    try:
+        run([
+            "ffmpeg",
+            "-y",                # overwrite temporary output if exists
+            "-f", "concat",      # concat demuxer
+            "-safe", "0",        # allow absolute paths
+            "-i", str(list_file),
+            "-c", "copy",        # copy streams without re-encoding
+            str(tmp_output)
+        ])
+
+        # Move temporary output to the final location
+        shutil.move(str(tmp_output), str(output_audio))
+    finally:
+        # Clean up the temporary file list
+        if list_file.exists():
+            list_file.unlink()
+        # Remove temporary output if something went wrong
+        if tmp_output.exists() and not output_audio.exists():
+            tmp_output.unlink()
+
+def process_one(German_Video: Path, Quality_Video: Path, output_dir: Path):
     # --- Probe video ---
     fps, duration, _, vstart = probe_video(German_Video)
-    _, duration2, _, _ = probe_video(Quality_Video)
+    fps2, duration2, _, vstart2 = probe_video(Quality_Video)
 
-    # --- Compute timestamps ---
+    if fps != fps2:
-    start = vstart + (n1 / fps)
+        raise ValueError("FPS of both Videos must be the same")
-    end = start + duration2
+    if duration <= 0:
+        raise ValueError("Duration of German_Video must be greater than 0")
+    if duration2 <= 0:
+        raise ValueError("Duration of Quality_Video must be greater than 0")
     
-    if end <= start:
+    # n1 = find_offset(German_Video, Quality_Video)
-        raise ValueError("n2 must be greater than n1")
+    n1 = -1
+    print(f"Offset: {n1}")
 
-
+    # print(f"fps: {fps}")
-
+    # print(f"Cutting audio from frame {n1} (timestamp {start:.6f}s) to timestamp {end:.6f}s")
-    # if duration < end:
-    #     raise ValueError("German_Video must be longer than what it needs to be cut to")
-
-    print(f"fps: {fps}")
-    print(f"Cutting audio from frame {n1} (timestamp {start:.6f}s) to timestamp {end:.6f}s")
 
     # --- Trim only audio ---
-    audio_file = Path(output_dir) / f"{Path(Quality_Video).stem}_german_audio.aac"
+    german_audio_file = output_dir / f"{Path(Quality_Video).stem}_german_audio.mka"
-    trim_audio(German_Video, start, end, audio_file)
+    quality_audio_file1 = output_dir / f"{Path(Quality_Video).stem}_original_audio1.mka"
+    quality_audio_file2 = output_dir / f"{Path(Quality_Video).stem}_original_audio2.mka"
+    if n1 < 0:
+        n1 = -n1
+        # Quality starts later than German
+        start = vstart + (n1 / fps)
+        if duration < (n1 / fps) + duration2:
+            # When the german audio is shorter than the original video
+            end = start + duration
+            if DEBUG: print(f"Cutting audio ({german_audio_file}) (from timestamp {start:.6f}s) to timestamp {end:.6f}s")
+            trim_audio(German_Video, start, end, german_audio_file)
+            # Get the end from the first original audio
+            start2 = vstart2 + (end - vstart)
+            end2 = vstart2 + duration2
+            if end2 > start2:
+                if DEBUG: print(f"Cutting audio ({quality_audio_file2}) (from timestamp {start2:.6f}s) to timestamp {end2:.6f}s")
+                trim_audio(Quality_Video, start2, end2, quality_audio_file2)
+        else:
+            end = start + duration2
+            if DEBUG: print(f"Cutting audio ({german_audio_file}) (from timestamp {start:.6f}s) to timestamp {end:.6f}s")
+            trim_audio(German_Video, start, end, german_audio_file)
+    else:
+        # German starts Later than Quality
+        # Get the start from the original Audio
+        start2 = vstart2
+        end2 = start2 + (n1 / fps)
+        if end2 > start2:
+            if DEBUG: print(f"Cutting audio ({quality_audio_file1}) (from timestamp {start2:.6f}s) to timestamp {end2:.6f}s")
+            trim_audio(Quality_Video, start2, end2, quality_audio_file1)
+        ###
+        if duration - (n1 / fps) < duration2:
+            # When the german audio is shorter than the original video
+            start = vstart
+            end = start + duration
+            if DEBUG: print(f"Cutting audio ({german_audio_file}) (from timestamp {start:.6f}s) to timestamp {end:.6f}s")
+            trim_audio(German_Video, start, end, german_audio_file)
+            # Get the end from the first original audio
+            start2 = vstart2 + end
+            end2 = start2 + (duration2 - duration - (n1 / fps))
+            if end2 > start2:
+                if DEBUG: print(f"Cutting audio ({quality_audio_file2}) (from timestamp {start2:.6f}s) to timestamp {end2:.6f}s")
+                trim_audio(Quality_Video, start2, end2, quality_audio_file2)
+        else:
+            start = vstart
+            end = start + duration2
+            if DEBUG: print(f"Cutting audio ({german_audio_file}) (from timestamp {start:.6f}s) to timestamp {end:.6f}s")
+            trim_audio(German_Video, start, end, german_audio_file)
+
+    if os.path.isfile(quality_audio_file1):
+        stick_together_audio(quality_audio_file1, german_audio_file, german_audio_file)
+    if os.path.isfile(quality_audio_file2):
+        stick_together_audio(german_audio_file, quality_audio_file2, german_audio_file)
 
     # --- Mux trimmed audio ---
-    final_file = mux_audio_into_output(Quality_Video, audio_file, output_dir)
+    final_file = mux_audio_into_output(Quality_Video, german_audio_file, output_dir)
 
     print(f"Final file with trimmed audio created at: {final_file}")
 
+    # print(f"Removing tmp Audiofiles")
+    # if os.path.isfile(german_audio_file):
+    #     os.remove(german_audio_file)
+    # if os.path.isfile(quality_audio_file1):
+    #     os.remove(quality_audio_file1)
+    # if os.path.isfile(quality_audio_file2):
+    #     os.remove(quality_audio_file2)
+
 def main():
-    for i in range(1, 12):
+    output_dir = "/home/honney/mount/Media/tmp/serien/ready/Black Bullet/Season 01"
+    for i in range(1, 14):
         # --- German_Videouts ---
-        German_Video = f"/home/honney/projects/mkv/AnoHana The Flower We Saw That Day (2011-2011) [imdbid-tt1913273]/Season 01/AnoHana The Flower We Saw That Day S01E0{i:02}.mkv"
+        # German_Video = f"/home/honney/mount/Media/tmp/serien/ger_low_quality/Black Bullet/Black Bullet Season 01 E{i:02}*.mp4"
-        Quality_Video = f"/home/honney/projects/mkv/Anohana - The Flower We Saw That Day/S01/AnoHana The Flower We Saw That Day S01E0{i:02}.mkv"
+        # Quality_Video = f"/home/honney/mount/Media/tmp/serien/high_quality/Black Bullet (Season 1)/Season 01/Black Bullet - S01E{i:02}.mkv"
-        n1 = find_offset(German_Video, Quality_Video)                  # first frame to keep
+        pattern = f"/home/honney/mount/Media/tmp/serien/ger_low_quality/Black Bullet/Black Bullet Season 01 E{i:02}*.mp4"
-        print(n1)
+        German_Video = glob.glob(pattern)
-        sys.exit()
+        pattern = f"/home/honney/mount/Media/tmp/serien/high_quality/Black Bullet (Season 1)/Season 01/Black Bullet - S01E{i:02}.mkv"
-        output_dir = "./output_dir"
+        Quality_Video = glob.glob(pattern)
 
-        # --- Probe video ---
+        if len(German_Video) > 1:
-        fps, duration, _, vstart = probe_video(German_Video)
+            raise ValueError("There are to many videos matching the German wildcard")
-        _, duration2, _, _ = probe_video(Quality_Video)
+        if len(Quality_Video) > 1:
+            raise ValueError("There are to many videos matching the Quality wildcard")
         
-        # --- Compute timestamps ---
+        process_one(Path(German_Video[0]), Path(Quality_Video[0]), Path(output_dir))
-        start = vstart + (n1 / fps)
-        end = start + duration2
-
-        if end <= start:
-            raise ValueError("n2 must be greater than n1")
-        
-        if duration < end:
-            raise ValueError("German_Video must be longer than what it needs to be cut to")
-
-        print(f"fps: {fps}")
-        print(f"Cutting audio from frame {n1} (timestamp {start:.6f}s) to timestamp {end:.6f}s")
-
-        # --- Trim only audio ---
-        audio_file = Path(output_dir) / f"{Path(Quality_Video).stem}_german_audio.aac"
-        trim_audio(German_Video, start, end, audio_file)
-
-        # --- Mux trimmed audio ---
-        final_file = mux_audio_into_output(Quality_Video, audio_file, output_dir)
-
-        print(f"Final file with trimmed audio created at: {final_file}")
 
 if __name__ == "__main__":
     if len(sys.argv) == 3:
         print(sys.argv)
         print(f"German_Video={sys.argv[1]}")
         print(f"Quality_Video={sys.argv[2]}")
-        only_one(German_Video=sys.argv[1], Quality_Video=sys.argv[2])
+        process_one(German_Video=Path(sys.argv[1]), Quality_Video=Path(sys.argv[2]), output_dir=Path("./output_dir"))
+    elif len(sys.argv) == 4:
+        print(sys.argv)
+        print(f"German_Video={sys.argv[1]}")
+        print(f"Quality_Video={sys.argv[2]}")
+        process_one(German_Video=Path(sys.argv[1]), Quality_Video=Path(sys.argv[2]), output_dir=Path(sys.argv[3]))
     else:
         # print(len(sys.argv), sys.argv)
         # sys.exit()
         main()
+
+
+